Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 18.06.2025 05:32

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

2024–10–10[John johnson John Johnson ]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

United States roster at 2026 Olympics will differ from 4 Nations Face-Off, GM says - NHL.com

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

One

the problem then depends on "how fast does the fuse operate?".

How did it feel to take your first gay BBC?

2024–10–16 [ OO OLAOYE OYEBODE ]

These devices are installed between the “hot” and “neutral” and protective ground.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Do you anal play alone?

what exactly is a ‘surge’ protector?

It also is a device that limits the change in current flow.

What is lightning?

What was something you did naughty with your cousin?

2024–10–14 [Omar Gharbi Omar Gharbi ]

For this case there are devices called Metal oxide varistors (MOV).

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

James Webb Space Telescope Has Spotted Something “Abnormal, Chaotic, and Strange” 60 Light-Years from Earth - The Debrief

There are three different concepts here that are getting confused.

[image of Common-mode choke]

(Dc diagram shown, AC is similar).

Would you raise your children like your parents raised you?

But it can get overloaded, and no longer works.

but I think this circuit , shows a few more pieces.

Because the load is inductive, the current lags the voltage.(by a bit).

How did your marriage end?

A circuit breaker is similar, but is resettable.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

The bolt then partially travels down the line to your home.

Why do people immediately disregard subjects such as flat earth, without opening their minds/taking time to research?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

A fuse is a non-resetable over current circuit protector.

If you caught a shoplifter at your yard sale, how would you handle it?

In schematic diagrams this is the symbol for a fuse:

This one hit behind the barn.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

What are the signs of covert narcissistic abuse that most people miss?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

eight

Why were the Japanese soldiers in WW II so hesitant to surrender in battle?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

At least they know the answer if they wanted it.

Now when you have a certain ac resistance, then a current flows in a loop.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Here is a simplified AC power diagram.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

He then describes Rainy Season and Lightning.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

He then asserts :

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

so, what happens?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

But… the neutral is now “floating” because of the 1 ohm resistance.

What does a fuse do?

nine

Edit 2024–10.

Upvotes:

Barnstars:

An AC voltage/ current source, and an ac inductive load.

but this device (an Inductor) … impedes the rapid changes in the current.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

So, the voltage could go up to 500 volts, and the fuse will not open up.

a photo is worth a thousand words.

[old diagram got deleted by accident]

The third is lightning and “how it gets conducted into a home.”

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This device then solves the entire problem.

I post the exact comment here.

First Sentence:

This is where this question deviates from being a 'generic' question, and becomes more specific.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

At one ohm, the resistor has a maximum of 1 watt power.

It seems Mohan does not understand the difference between a comment and an Answer.

The MOV will conduct when the voltage exceeds 50% of line voltage.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

One is “what exactly is in a ‘surge protector’ ? ”

This is where the MOV conducts again, and dissipated the energy.

This is 'the assistant's answer'

There are two important concepts here.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

He then describes the function of a fuse.

These are simplified answers to the original question, and does not change anything I wrote above.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

The other is “what does a “fuse” do?”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This is the picture of an electronic coil of wire wound around a core of magnetic material.